Join Waitlist We will inform you when the product arrives in stock. Just leave your valid email address below.
Email We won't share your address with anybody else.

Black ABS Filament – 1.75 mm

Black ABS Filament – 1.75 mm

$15.00$105.00

SKU: N/A Categories: , Tags: ,
Clear
  • Description
  • Additional information
  • Reviews (2)

Description

MakeShaper’s Black ABS filament for your 3D printer allows you to make anything. Our ABS (Acrylonitrile Butadiene Styrene) is made in the USA and features the following qualities essential to any maker:

  • FDA-approved polymers and colorants
  • UV-stable
  • Laser-gauged tolerances
  • Small batch production
  • Vacuum-sealed with desiccant in moisture barrier bag
  • Contaminant-free
  • Consistent color

Black ABS Settings

Optimal Print Temp: 210°-245° C

Bed Temperature: 110°-130° C

Print Speed: 25-100mm/sec

Pantone Black C

Spool Sizes10 Kilograms5 Kilograms2.25 Kilograms1 Kilogram650 Grams220 Grams
Hub Diameter (mm)-53.9853.9852.7152.7153.90
Spool Diameter (mm)406.4304.80298.45203.20212152.40
Spool Thickness (mm)390.53184.15117.4873.154035.44


WARNING: This product can expose you to Styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Additional information

Size

1 Kilogram, 2.25 Kilograms, 5 Kilograms, 650 Grams

2 reviews for Black ABS Filament – 1.75 mm

  1. Hi everyone 🙂 I’m pretty new to 3d printing and I have many questions on the subject, so I hope you will not get mad at me for asking here at least a few of them. I think even before I’ll get seriously into modelling I should focus on the software I’m going to use, and that’s what I’d like to ask you about. Mainly, should I begin with the most simple/crudest software there is or would it be better to start on something more complex? I’m worried that I’ll get some unwanted quirks while working on simpler software. The second question is about the CAD software as well: should I search for CAD software that would allow me design and slice it in it, or should I use a different software for each of them? Does it even make a difference? Surprisingly, I couldn’t find the answer to that, as it seems like most sites want to focus on the very basics (like what is 3d printing and so on), and while the answers to those questions are fine, it seems like no one wants to go into the details (it looks like some of them even steal from each other! I swear I’ve found the same answers to the same questions on at least 3 different websites) but I’m getting off-topic… The last question is about 3d pens. Would it be possible to somehow convert whatever I draw with a 3d pen to a 3d model in a program? For example, if I’ll draw a dog with 3d pen, would it be possible to get its design in a software? I’m not sure how that could even work, but the very idea sounds interesting to me. Anyway, I think I’ll stop here just in case no one will ever answer me and all of this writing will go to waste. I apologise that I’m using your content to ask questions, but I hope you can relate and assist a rookie like me. Anyway, thank you for posting. I learned something from this and that’s always appreciated. Thank you, and I hope to hear back from you very soon 🙂

    https://www.selfcad.com

  2. 2 out of 5

    The color on this is pretty good, but I’ve never seen an ABS with this much shrinkage. Its been near impossible to get a print that will stick to the bed without curling up at the edges. It’s really not worth fooling with.


Add a review