Join Waitlist We will inform you when the product arrives in stock. Just leave your valid email address below.
Email We won't share your address with anybody else.

An Insight into Post-Processing ABS and PLA 3D prints

If you are a 3D printing enthusiast, you must be aware of the fact that 3D prints aren’t ready-to-go. They need some time to set in the shape. In most cases, if you are too eager to remove the final print from the platform, you might end up leaving uneven dents on the print. This occurs due to the fact that the filament hasn’t yet settled into its form. Today, some of the most popular 3D printing filaments include ABS and PLA. Given their versatility and unique printing features, both ABS filament as well as PLA filament are popular among 3D print enthusiasts as well as commercial crafters.

To help you avoid any uneven dents on the surface, in this blog post, we will share some amazing tips. These tips will help you avoid the struggles of removing the support or fly-away objects. So, without any delay, let’s jump into it.

Quick Post-Processing Tips for ABS and PLA Filament

1-Minimize the Supports:

The very first step when it comes to handling the supports actually begins way before the start of the printing process. These changes need to be done within the slicer software. How can we do that? Whenever you are setting the slicer as per your requirement for print orientation, pay proper attention to the parts that need maximum support. Now, try and include minimal support for the same. Your prime goal is the minimization of supports added to the print.

However, you need to be sure that these additional supports in no way affect your print or distort them. Find the perfect balance for the support that can be removed safely. This will help reduce the amount of work you have to do after the post-processing is done with the ABS filament or the PLA one.

2-Assess the Material:

The entire post-processing method depends majorly on the material being used for the 3D print. So, the next step in easing the after-print process is to determine the quality of the material you have chosen. This particular thing helps you assess the overall time required to help the 3D print set in its form properly. Now, you have purchased an ABS filament from one place that doesn’t mean that the one you bought from the store next to it will be the same. Even if they fall under the same category, the quality can drastically differ.

In such cases, it is advised that after you have tried out various shops, you should stick to the one that provides you the highest quality at affordable prices. This will help you maintain a single time-frame for all your prints.

3-Keep in Mind the Safety Precautions:

Even though the filaments are rendered safe for use in the home environment, it certainly houses chemicals that make the prints smooth and shiny. This is why you need to be careful when working with the chemical-based filaments for 3D printing. Regardless of whether you use ABS filament, PLA filament, or any other variant, there will be a certain amount of chemical present within. Whenever using the filaments, you need to use a durable glove and get the printing done in an area that is well-ventilated.

Additionally, you need to ensure that the gloves you use are non-latex as the THF can eat through the latex gloves. You can replace your latex gloves with neoprene or nitrile gloves.

4-Post Processing with ABS Filament:

The best and the most effective way to smoothen the ABS filament is to use the same with the acetone vapor.

You will need:

  • Acetone
  • Paper Towels
  • Sealable Container
  • Tin Foil

How to smoothen/polish your prints with ABS filament?

  • Remove any of the excess material left off after the 3D printing is done
  • Place some paper towels on all 4 sides of the plastic container
  • Remember to get this task done in an area that is well-ventilated
  • Sprinkle some acetone towards the bottom half of the container
  • Now, cover the container’s bottom part with a tin foil
  • Place the 3D print inside the container & allow the same to settle for hours
  • Remove the print from the container and let the acetone to vaporize off the final object
  • Now, put up the 3D print in a place you desire

5-Post Processing with PLA Filament:

For the PLA filament 3D prints, hand polishing done with the help of THF or Tetrahydrofuran is the best option. While the acetone option works perfectly with ABS filament, the THF works amazingly with the PLA filament-based prints.

You will need:

  • Non-Latex Gloves
  • THF or Tetrahydrofuran
  • A non-dyed, lint-free polishing cloth

How to polish/smoothen the prints with PLA filament?

  • Remove the excess material from the 3D print created from PLA filament
  • Put on the non-latex hand gloves & bring the polishing cloth
  • Be in an area that is well-ventilated
  • Dip the polishing cloth in the THF & polish the print just as you would a shoe
  • Use a circular motion for the best results
  • Let the print sit at a place and allow the extra THF to evaporate
  • Put up the final smoothened piece in an area of your choice

Conclusion

Whether you choose the ABS filament or the PLA option, both come with their own set of pros and cons. However, if you consider the factors such as biodegradability, printed prototypes, material properties, toxicity, and so on, you can surely land on the perfect 3D print. Use it for commercial or personal use; these materials surely help you acquire the best and smooth 3D print. Looking for the best quality 3D printing filaments for your commercial or crafting needs? Try out the range of filaments provided at Make Shaper. We house everything from ABS filament to NYLON filaments for your unique printing needs. All our filaments have been affordably priced without any quality compromise. So, scroll through our collection and purchase your filament today!

New Year 3D Printing Ideas Using PETG Filament

The New Year 2020 is just a few days away and everyone is gearing up for it. For the 3D printing geeks, it is another great opportunity to try something new. Whether you are a creative person, professional printing company or a home décor enthusiast, 3D printing is for everyone. You can do so many things with it and create something unique and mind-blowing for the New Year Eve. It is time to impress your family and friends with some New Year 3D printing ideas.

PETG filament is one of the most popular 3D printing filaments that can be used to create various attractive pieces. It is superior to other types of 3D printing filaments for various reasons. You can create some amazing designs using the PETG filament with excellent results.

Here are some of the best New Year 3D printing ideas using the PETG filament:

Why PETG Filament are Best for 3D Printing?

PETG filaments is an excellent material for 3D printing because of its extraordinary strength, toughness, sturdiness and offers strong prints. With features like low shrinkage, it is perfect for printing objects of larger surface. Compered to other materials like the ABS and PLA, the PETG filament has higher strength, and much smoother finish.

PETG stands for polyethylene terephthalate glycol-modified, and is known for its perfect combination of strength and ductility. Because of these popular features, PETG is widely used for making mechanical parts and robotics. Some of its other features include being high chemical resistance, acidic and alkalic resistance. If you are into creative projects like rings, collars and bracelets, then the PETG is one of the best options out there.

These are some of the reasons why PETG if perfect for 3D printing and you should be using it for 2020 New Year printing ideas.

2020 New Year3D Printing Ideas using the PETG Filament

If you want to make the New Year extra special, create something fun, original and colorful to enjoy. Here are some of the best ideas for 2020 New Year 3D printing ideas:

  • 2020 New Year's Shades

This is one of the most popular themes for 3D printing. Every year you get to see the large glasses with the New Year design on it. Be creative this time and use a different design to create a 2020 New Year Shades.You can add accessories as well. Browse the internet for the ideas or create your own and make a history this New Year evewith an amazing 2020 Shades for the New Year. Make for the family and for friends and wear them to the party and show off your creative skills. PETG filament can be used to create high-quality sturdy pieces.

  • 2020 Key Ring

Key rings are the most popular themes for 3D printing. You can gift the key rings to friends and family. The best thing about them is that you can customize it to make it extra special for the New Year occasion. A New Year key ring will not only keep your keys together, it will also give it a festive look. And, it will also remind everyone of the great time you had together in the New Year Eve. You can use many designs and colors to create that special key ring for the group. With a flexible 3D printer filament like PETG, you can create any kind of design and it will last for a lifetime.

  • 2020 Decoration

The next best idea is creating 2020 theme decorations. You can link the four numbers together to create unique patterns and in different bright colors. These nicely printed 3D décor items can be used for gift wraps, decorating the room, or cake. If you are looking for some unique décor ideas for the New Year for general purpose, this is one of the best ones. You can easily create a theme decoration and make the evening special. Likewise, you can use any other theme as well for creating décor items. PETG filament is a flexible material that makes 3D printing easy and effortless. Choose the design, set the printer and let the magic begin. You will not be disappointed with the end results.

  • 2020 Earrings

If you want to show the world your festive mood, add a pair of 2020 earrings and your ensemble for the evening is complete. Wear them or gift them to a loved one and see the buzz they create in the party. Everyone will be asking where did you get it from. You can create some amazing 2020 earring designs using the PETG material. They are widely used for creating jewelry pieces as the PETG materials are strong and sturdy. Add 2020 earring to your creative list and customize it to make your New Year celebrations memorable. If you are thinking of a gifting idea for someone special, this earning can become that special gift. A customized earring for the New Year party will make all the difference in the world.

  • 2020 Wine Bottle Topper

Cracking open the wine or champagnewhen the clock strike 12 on the New Year’s Eve is the classic way to welcome the new year. You can make the occasion even more special with a 2020 wine bottle topper. Show the guests how festive your wine bottle is with a customized wine bottle topper. After popping the bottle open, put the topper back on and take that picture that will remind of the special day. You can use the topper for various occasions as well.

The Bottom-Line

These are some of the creative 3D printing ideas for the New Year Eve that you can use throughout the year. These 3D prints will help you bring out the festive mood and help you create a great impression on your guests. Make Shaper offers high-quality 3D printing filaments. We have a wide range of filaments for various 3D printing purposes like PLA, ABS, ASA, HIPS, PVA, PETG and more.

How PETG Filament Make 3D Printing Great

When it comes to getting the best 3D printing the PETG filament is the top choices. No matter what printing skill level you have, PETG makes 3D printing easy and effortless. It stands for Polyethylene Terephthalate and is the most common type of polymers used today. It is widely used for making water bottles, food packaging and various other plastic items. But, its most popular achievement is being the number one choice for 3D printing. Soon PETG is going to be the preferred 3D printing filament and for all the right reasons.

The popularity of the PETG lies in its various features and advantages that combines the characteristics of ABS filament and PLA filament’s ease of printing. With PETG, you get the best of both the worlds.

Even buying PETG filament online is so easy and convenient. If you are looking for a quality 3D printing filament, then PETG is the best option. It makes 3D printing great in many ways.

Knowing PETG Filament

If you are new to PETG then you definitely want to know what it is. It is a filament created from a mixture of polyesters and has the same kind of plastic used for manufacturing plastic bottles. The only difference is the presence of extra glycol, which make it such a strong material.  in order to make it a stronger material. The reason why it is considered as one of the best filaments for 3D printing is that it has great strength, temperature resistance, quality and durability. You can rely on its various features for better quality 3D printing. It is better than ABS or PLA because of the quality and efficiency difference between them. The PETG is definitely greater than the other two.

PETG Filament Meets Practicality Needs Easily

The PETG filament has many practical properties which makes it an ideal option for 3D printing. It can meet the quality and efficiency needs easily. It is stronger than the other materials and can withstand the demand of high-quality printing needs.

Here are some of the features that make PETG so great:

  • It does not create any odor during printing. Strong odor is one of the most unwanted things for 3D printing, Thankfully, the PETG filament does not create string smell when printing.
  • It offers greater printing results, better than any other printing filaments. With the regular PETG filaments, the heating can result in hazy prints as overheating can may cause it to be brittle. The Glycol present in the PETG is a helpful material that does not get affected from the heat and provides a high-quality result.
  • Most of the printing filaments may buckle under the impact, but not the PETG. PETG filament is known for its strength and has high resistance to damage from impact.
  • Another great thing about the PETG filament is that they can be sterilized easily. This is helpful in keeping the PETG strong and it offers greater resistance.
  • Layer adhesion is another desirable trait that filament should have. PETG filament offers a great layer adhesion.
  • PETG is a material that does not shrink or warp under pressure and provides great end results, which make them a great option for 3D printing needs.
  • PETG can be recycled as well. This feature makes it a cost-effective option as well. It does not matter whether it had been printed or not, you can still recycle them. The only thing you need to take care of is to recycle them as per the industry standard for quality and safety reasons.

PETG filament had any practical properties, which makes them such a great option for high-quality 3D printing results.

When to Use PETG Filament?

Is it PETG filament right for you? If you want high-quality print, reliable filament and save time and money then the answer is yes. Many people who prefer PETG over ABS or PLA, do so because it is very flexible.  If flexibility is something you are looking for then the PETG is the perfect option.

Strength wise, the PETG is the hardest filament to break. They are ideal for printing jobs that needs a very strong filament that is highly resistant to damage. If you have to print a large number of photos or documents the PETG can meet your specific needs easily. PETG has low shrinkage properties, which makes them such a great option for people who need large number of prints without losing quality. Likewise, you can use the PETG filament for printing larger items without worrying about the quality. The PETG is very strong and highly resistant to elements like chemicals, acids, water and even alkali.

Quality of the Printer Matters

While the PETG filament is strong and can withstand a lot of things, you need a quality printer for the best results. When it comes to 3D printer, you must have the best one to get the best results. There are so many options for 3D printers, but not all printers are of high-quality or can give you the same results you want. PETG comes with specific requirements to get the best result. It must have some important features like it must be equipped with a hot end capable of reaching a temperature of at least 235°C.While the ideal temperature is 265°C, but 235°C is quite sufficient for some PETG filament.

The Bottom-Line

The PETG filament is one of the best options for getting high-quality 3D printing results. The filament comes with many features that allows for high-quality results in a cost-effective manner.

Nylon Filament for 3D Printing: Properties, Features, Pros, and Cons

Whether you just started 3D printing or have been working on it at a professional level, you might have surely come across the PLA or ABS filaments. These materials can produce amazing prints with ease of use. However, they surely have certain limitations. However, if you have been looking for certain material that comes with high flexibility, strength, as well as durability, you need to take a look at the Nylon filaments designed for 3D printing purposes.

Among the materials that can be used for the purpose of 3D printing, the Nylon filament tends to possess some of the most versatile features.

Nylon caters impeccable prints. The finish acquired from the use of this material is very silky as well as smooth. However, you need to monitor the material for dryness. Any moisture absorbed by Nylon filament can lead to uneven printing.

Strength and Durability: Nylon Filament

When it comes to strength, nylon filament is a perfect option for the users. With nylon used as the printing filament, you will not experience any form of snapping or brittle effect. You can also note that the nylon 3D printing process produces parts that are very tough and designed to tolerate any kind of shock. Moreover, nylon is also known for being impact resistant.

On the other hand, the thinner sections of the nylon printed 3D project can become very flexible. Given its high-flexibility, nylon is also used to create parts that require diminished friction co-efficient with little to no need for lubrication. These filaments are also incredibly tensile.

3D printing properties of Nylon Filament

All variants of the nylon filament threads tend to be hygroscopic. This suggests that they can absorb water easily. This might come to you as a surprise, but the nylon 3D printing filaments can easily absorb as much as 10 percent of its overall water density within 24 hours. In order to avoid this from happening, you have to keep your filament inside a container or bag that is completely airtight. To ensure that there is no moisture already present inside, you need to put in a desiccant.

Nylon filament 3D prints that have already absorbed water before the initiation of the printing process will come with finishes that aren’t at all desirable. You might also experience the filaments popping in the extruder. A dry filament ensures that you have a nice sheen with a smooth texture.

Why Nylon filament for 3D printing?

When talking about 3D printing, Nylon comes with its own distinct collection of pros & cons.

Pros:

  • Nylon tends to be durable and very resilient
  • Excellent flexibility to strength ratio
  • Can easily be dyed or colored
  • Resistant to UV
  • Better chemical resistance as opposed to ABS or PLA filament

Cons

  • Nylon can be a bit sensitive to the presence of moisture and needs to be kept perfectly dry
  • You have to dry the nylon filament in an oven before printing
  • The first layer of nylon filament can warp
  • Most of the nylon filaments come with a maximum shelf-life of 12 months
  • Nylon tends to shrink during the cooling process of the printed parts leading to less precision

Print Temperature For Nylon Filament

Now, this is where things start getting tricky. Nylons tend to vary widely when it comes to temperatures. This is because each of the brands comes with its own temperature range. The temperature for Nylon filament printing can start anywhere from 230 degrees Celsius to as high as 300 degrees Celsius.

How can you dry the Nylon filament?

Before you start printing with the nylon filament, you should make sure that it is completely dry. If the filament has already been stored inside the air-tight box with the desiccant, you might not have to dry it before the 3D printing process. However, if you are unsure of its storage, it is better if you try and dry your spool.

Do not let go of your 3D prints with moisture-laden nylon filament that will surely ruin your project. In order to dry the nylon filament, you have to pop in this filament in your oven for a time period of 5 to 6 hours at 85 degrees Celsius. Remember that you shouldn’t leave the filament unattended when it is being dried inside the oven. Your silica gel-based desiccants can also be recharged in the very same way.

Get Optimum 3D Printing Results with Nylon Filament

When opting for 3D printing technology with the nylon filament, you need to set the temperature somewhere between 240 degrees Celsius to 260 degrees Celsius. But obviously, you can try and experiment for your convenience.

Now, when talking about the printer’s heated bed, the ideal temperature should be somewhere close to 80 degrees Celsius. However, you can try and keep it at 100 degrees Celsius as nylon tends to cool down fast which can lead to warping issues.

Conclusion

Nylon filament use for 3D printing can be particularly easy when you know the perfect temperature. Obviously it requires a bit of practice to master the ideal temperature. However, you know perfection is something that comes only with practice. Not just that, nylon can be comparatively affordable as opposed to mainstream options such as ABS or PLA filaments.

Looking for affordable and high-quality nylon filament? At Make Shaper, we house a varied range of filaments to cater to all your 3D printing requisites. Our collection houses some of the best materials that have been quality-checked to improve the project output. So, grab your filament today by visiting our website. Give us a quick call to know more about our products at (330) 753-0100. You can also mail us at makeshaper@villageplastics.com.

Top 7 Thanksgiving 2019 Gifts You Can Create With 3D Printing Filament

With Thanksgiving 2019 a few weeks away, your enthusiasm must be up on the charts. However, one thing that worries most of us is the preparation of the gift that we are supposed to give to our friends and family members. Given the fact that Thanksgiving is a memorable holiday, everything from the decoration to dinner should be perfect, and so should your gift. Whether it is your favorite cousin coming from a far off distance or your grandparents making a quick visit, a unique gift can surely make your memories better. If you happen to have a 3D printing machine and the perfect filament to print with, you can create a custom gift for your loved ones.

So let us take a look at some of the unique Thanksgiving gifts you can present with the use of 3D printing filament.

1-Pen/Pencil Holder:

If you are welcoming someone who basically stays in the office all day long, a pen/pencil holder is just what they need. This will help them organize their stuff in a better way, and they will surely thank you for this unique and thoughtful gift. If your family member is someone who is always forgetful and asks around for a pen or pencil, this organizer will help them store the office essential in one place, so they aren’t lost. You can create your own custom design using the 3D filament or look through various designs available on the internet. Keep in mind the size of their desk to ensure that the 3D printer holder isn’t too small or too big for them.

2-Business Card Holder:

A businessman is always on the run. With so many leads to chase and so many clients to follow up with, things can get messy. This is especially true if your point of contact with the clients is via their business cards. In such a case, a good old cardholder with flip-top could be the best gift for someone in your family who has just started as an entrepreneur or has been handling the business for decades. You can easily create a flip-top holder for cards by creating two different parts with use of the 3D printer. Now, create a secure hinge to connect both these parts and Voila! Your perfect Thanksgiving 2019 gift is ready!

3-Vintage Calendar:

If your cousin or sibling is someone who loves the vintage era and the designs that went around during the pre-modern times, a vintage calendar could be the perfect gift for them. Now, designing the perfect calendar with the help of 3D printing filament for Thanksgiving 2019 could be a bit tricky. However, with patience and a bit of time to spare, you can surely create amazing designs that will impress everyone. This vintage calendar will remind your sibling of you every time they look at it to get the date. So, go on and mesmerize everyone with your 3D printing skills.

4-Jewelry Tree:

Now, let us talk about the pretty things in terms of a gift. If you have a family member that is passionate about fashion and loves to buy everything latest on the trend, you can gift them a jewelry tree. Let us face the fact that keeping your precious jewelry secure can be a tricky business. More than often you might lose a pair of earring or other. With the jewelry tree as the perfect Thanksgiving 2019 gift, you can hang it all without having to worry about losing them. This could be a perfect gift for your sister, cousin, mother, or wife. Trust us; they will surely adore you for this amazing gift.

5-Table Top Bowl:

Another thing you can add to your list of gift items is a tabletop bowl that can be used as a way to store your daily need items such as pens, keys, fruit, or assorted options. Create your very own style or take help from the internet, a bowl that helps keep things in place will never go out of style. Try and look for designs that come with perfect grooves that help hold your items in position. You can gift this bowl to anyone as a Thanksgiving 2019 gift. However, keep in mind that 3D printing takes time, so try and plan things way ahead of the holiday.

6-Wall Décor:

Now, who doesn’t love a beautiful décor item? Your 3D printing machine allows you to create beautifully intricate designs that can be hung up that boring old walls to make it more interesting. You can go with a cute black and white panda or try to rev it up with some modern abstract designs. The choice is entirely yours to make. However, you need to keep in mind that wall art should reflect the home décor of the one you are gifting it to. So, try and get a glimpse of theme of their house to ensure that your gift for Thanksgiving 2019 will fit in perfectly.

7-Planter Pot:

A little bit of greenery goes a long way. The easiest yet the best thing you can print with the use of your 3D printing filament is a planter pot. If you are out of ideas for a Thanksgiving 2019 gift, you can always go with this failsafe. Better yet, add a plant to the pot and gift it to your loved ones. They will surely love this breath of fresh air added to their indoor environment.

Conclusion

Regardless of what you choose to print, a gift should always come from the heart. Remember, personalization is the key to make your gifts special. So, be ready this Thanksgiving 2019 to see a big smile on the face of your loved ones. Remember to be patient for the perfect 3D print as good things always take time.

Did you just run out of your 3D printing filament? Looking for a reliable seller to get some more? Visit Make Shaper and get access to high-quality 3D printing filaments. We house extensive collection filaments, which include PLA, ABS, ASA, HIPS, PVA, and many more. Shop today and make your Thanksgiving gift with the perfect filament.

An Expert Buying Guide for Best 3D Printer Filament Selection

The choice of filament is a crucial part of selecting various 3D printing materials as any production of the 3D object will be incomplete without it. A 3D printer filament, also known as 3D printer ink, usually comes in a plastic form, but also available in other materials. If you are doing your part of the research for the best 3D printer filament, then this page will help you understand various 3D printer filament material so that you can select the best available product in the market for your 3D printing purposes.

3D printer filaments come in various types, and depending on the object, you may try various filament choice to build. Check here the best 3D printer filaments available in the market for 3D printing and different purposes they serve.

Before That Let’s Know What 3D Printer Filament is

A 3D printer filament is used to make three-dimensional printing. As most used and best 3D printer filaments, ABS - Acrylonitrile Butadiene Styrene and PLA - Polylactic Acid is the primary selections for most of the 3D printing businesses. However, there are more types of 3D printer filaments available in the market, but they may be costly options and not suitable for all-round purposes. 

Different Best 3D Printer Filaments Available in the market

Acrylonitrile Butadiene Styrene – ABS

ABS filaments are the most demanding among other filaments. High-quality ABS 3D printer filaments are tough and extremely impact resistant. ABS filaments are slightly flexible and strong, which makes it a very compatible material for 3D printer filament. In addition to this, ABS 3D printer filaments can be easily extruded, which offers easy handling and operation. It requires a print temperature between 210°C – 250°C. ABS is the best 3D printer filament option for automotive parts, moving parts, toys, and electronic housing. This type of filament also can be used in various automotive components, kitchen appliances, electronic assemblies, protective headgear, and more. This is the cheapest thermoplastic available in the market and extremely popular for its lightweight, flexibility, durability, and sturdiness.

Polylactic Acid – PLA

Another popular and best 3D printer filament choice for this list. PLA printer filament is made of biodegradable thermoplastic derived from eco-friendly and renewable resources such as sugar cane, corn starch, potato starch, and tapioca roots. This 3D printing filament is an environment-friendly option compares to ABS, which is a petroleum-based non-biodegradable plastic. It doesn’t produce any toxic fume during the printing, so it’s best preferable for classroom and home uses and suitable for kids in love with 3D printing. It requires a print temperature between 180°C – 230°C. PLA can be degraded into inoffensive lactic acid, which makes it suitable for surgical implants and medical Ativan suturing. Surgically implanted pins, rods, and screws made out of PLA component naturally break down inside the body within 6 to 12 months. Aside from this, PLA is also used for disposable garments, hygiene products, disposable tableware, classroom, and training purposes. Although PLA is the easiest and best 3D printer filament for beginners, it’s prone to jamming printer nozzles. It also attracts water molecules and becomes brittle at time.

Polyvinyl Alcohol – PVA

PVA filament  is also among the best 3D printer filament choices available in the market. This 3D print is made out of special biodegradable plastic, which is water-soluble. Based on polyvinyl alcohol, PVA is completely non-toxic. It’s easy to print and a great choice for printing 3D models with overhangs, which is impossible to print without support. It requires a print temperature between 180°C – 230°C. PVA printing filaments are commonly used as a thickener, paper adhesive, feminine hygiene products, freshwater fishing sports, and more. It’s completely biodegradable and non-toxic, but not easy to use and costly compared to other available best 3D printer filaments.

Polyethylene Terephthalate with Glycol - PETG

PETG filament is an extremely tough and durable 3D printing material. It can be printed without any odor. It offers the durability of ABS but with superb flexibility and minimal warping and shrinkage, which makes it one of the best 3D printer filament choice. It offers superior impact-resistance. PETG is not brittle and requires a temperature between 220°C – 245°C to 3D print. This type of 3D filament is best to be used with printing products subject to sustained or sudden stress, such as mechanical parts and protective components. PETG is a feature-loaded for its strength, flexibility, and recyclable property. It’s also not brittle nor wrap prone, but difficult to use and has poor bridging characteristics.

High Impact Polystyrene - HIPS

Another biodegradable and best 3D printer filament choice for our list. It has absolutely no adverse effects on humans or pets in contact. It used Limonene as a solvent just like ABS and counted as a superb material 3D print supporting material. It usually could be an excellent support material when we 3D print ABS with dual extrusion printer. HIPS requires a print temperature between 210°C – 250°C. It can’t use for any specific application as it can’t fabricate the 3D object itself. It’s a popular secondary 3D printer filament material to be used with dual extrusion 3D printers to offer structural support while building complex objects. HIPS filament is mostly used in the food industry for packaging. It is also used for medicinal tray production and CD disk packing. Although it has less warping, it displays adhesion and curling issues.

Polyamide or Nylon

It’s a popular 3D printer filament option, especially for industrial applications. It’s a cost-effective option and known for its excellent properties such as lightweight, strong, wear-resistant, flexibility. It could be the best 3D printer filament choice for functional and mechanical parts due to its high melting point and strength. It has a print temperature range between 210°C – 250°C. Nylon filament is an ideal selection for machine parts, gear and bearings, structural parts, dynamic load, mechanical components, tools, consumer products, toys, and more.

At MakeShaper, we are offering a wide range of best 3D printer filaments with the assurance of high-quality and best market price. Browse our website today to check all our product offerings, their respective prices, and feature sets. For instant query solving and questions, give us a call at 1-330-753-0100 now. We will be happy to help you.

Keene Village Plastics Announces Acquisition of MakeShaper

Barberton, OH — February 25, 2019 – Keene Village Plastics (KVP) is pleased to announce the acquisition of a North Carolina based 3D filament manufacturer, MakeShaper.

MakeShaper and KVP share common denominators in that all filaments are engineered, tested, and manufactured in the USA. KVP is excited to have the opportunity to continue to support MakeShaper customers with the same consistency the brand is known for.

KVP is known in the industry for its high-end engineering grade filaments. With the acquisition of MakeShaper, KVP can extend its reach to provide high quality filaments to the consumer and hobbyist market. 

KVP looks forward to continuing the work of MakeShaper and servicing customers at the same level they have come to expect.

KVPis a precision manufacturer of Thermoplastic Welding Rod and 3D Printing Filament. The company offers an extensive product line and possess manufacturing capabilities to extrude custom sizes, shapes and profiles to meet all of your quality requirements for extruded product.

For further information call 330.753.0100 or email: makeshaper@villageplastics.com. KeeneVillagePlastics.com, MakeShaper.com.